(((Home Ear Irrigation)))
Faucet Installation Instructions:
1. R R emove your aerator from your bathroom faucet.
2. Insert adaptor washer into adaptor and screw adapter into faucet.
3. Screw (ribbed turning section) onto adapter clockwise by hand until tight. Do not use pliers.
4. Adjust water temperature. Water should be tepid. Hot or cold water will make you dizzy.
5. Attach probe to connector at end of tube by pressing and turning until it locks into place. Do not force.
6. Turn on tap: use selection lever to adjust water pressure. The flow of water may be increased gradually to facilitate the flushing of wax from the ear canal. Stop if any pain felt.
DO NOT USE IF YOU HAVE A HOLE IN YOUR EAR DRUM OR IF YOU HAVE EARTUBES.
Shower Installation Instructions:
1. R R emove your showerhead (A) from the shower pipe (B). Wrap a piece of plumbers tape (included) twice clockwise around the shower pipe threads (B). Pull tight enough to draw the tape down into the threads.
2. Then screw on your diverter valve (C) clockwise by hand onto the shower pipe until it’s tight. (You do NOT need a wrench)
3. Wrap plumbers tape around the Diverter valve threads (D). Then, screw your showerhead onto the diverter valve and tighten by hand.
4. Attach the probe to the connector at the end of the hose (F) by pressing and turning until it locks into place. (Do not force it. It should easily slide in and lock in place.)
5. Turn on the shower; divert the water flow to your probe slowly switching the lever (G) on the side of the diverter valve until the desired pressure is reached.
6. Adjust the temperature to tepid. Hot or cold water will make you dizzy.
7. You do not need a wrench to install this product.
DO NOT USE IF YOU HAVE A HOLE IN YOUR EAR DRUM OR IF YOU HAVE EARTUBES.